Designfax weekly eMagazine

Subscribe Today!

Archives

View Archives

Partners

Manufacturing Center
Product Spotlight

Modern Applications News
Metalworking Ideas For
Today's Job Shops

Tooling and Production
Strategies for large
metalworking plants

Hinge may get Army quadcopters to move faster

Researchers at Aberdeen Proving Ground in Maryland think a new hinge is the key to get large, load-bearing Army quadrotors to climb a few dozen feet in seconds.

Dr. Jean-Paul Reddinger, a research aerospace engineer with the U.S. Army Combat Capabilities Development Command, now known as DEVCOM, Army Research Laboratory, is studying how quickly a quadrotor the size of a king-sized mattress can ascend from the ground to the rooftop of a two-story building, particularly with large payloads such as the weight of a Soldier.

Reddinger invented a hinge at the root of the quadrotor blade next to the hub. He situated it so that the blade pitch changes with rotor speed.

Army researcher Dr. Jean-Paul Reddinger has invented a new hinge that enables large, load-bearing Army quadrotors to climb a few dozen feet in seconds. [U.S. Army graphic]

 

 

As quadrotors and similar aircraft are scaled up, the extra inertia of the rotor blade slows them down, he said.

It can take a long time for lightweight electric motors to change the rotor speed and thrust, which ultimately impacts the vehicle's speed, range, and flight stability, but with this coupling the thrust becomes more sensitive to changes in rotation per minute, or RPM.

Reddinger said the difference is large quadrotors carrying these loads that could climb roughly 25 ft in as little as 2 seconds with the hinge instead of 3 or 4 seconds without it.

"Every second less that it takes a quadrotor to get where it's going is a second less that an enemy can target it, and a second less that a Soldier has to wait for it to deliver supplies and intelligence," Reddinger said. "When a pilot, or flight controller, asks for more thrust to climb, it takes much more time for the aircraft to move."

Reddinger said if they can increase the thrust sensitivity to changes in the RPM, it will allow for greater control authority and more agility.

Helicopters with four rotors, commonly referred to as quadrotors or quadcopters, are part of a family of unmanned aircraft systems that have two pairs of counter-rotating rotors and propellers. These vehicles can hover, fly forward, and perform vertical takeoff and landings, similar to helicopters.

Common Army UAS requirements include speed, flexibility, adaptability, and the ability to provide real-time surveillance and carry payloads.

This invention will likely improve agility without fully committing to a swashplate and the weight penalties associated with it, he said.

According to Reddinger, people usually design around the issues of responsiveness in one of two ways. They add a swashplate to actively control the blade pitch, or they just put smaller rotors on the aircraft like an octacopter, he said.

"The problem is that both of these solutions weigh more, which means the aircraft can't carry as much gear, cameras, or batteries," he said.

Reddinger discussed the hinge's 30% reduction in thrust response in the paper, "Coupled Pitch-Lag Hinge for High Inertia Electric Rotors." He recently presented these findings at the Vertical Flight Society's 76th Annual Forum and Technology Display.

Source: U.S. Army DEVCOM Army Research Laboratory

Published December 2020

Rate this article